Test QC 12V/1.5A This particular cable is sent with the TS80 soldering iron
Pay attention to the scratch code to check the originality I was lucky, Baseus got the original one. – for $0.99 short for 3A. The usual price is about $2-3, they sell for a promotion: This is usually seen on good 20cm Orico cables, for a 50cm cable this is good. There is a logo and the necessary information
All types of QC work with this cable.

Quality Baseus 3A (Type-C) cable for $0.99

At a current of 1.5A, the loss was 0.085V (calculated resistance value 0.056 Ohm).
The connectors are made in such a way that there is a smooth transition to the bandage on the cable so that it does not bend at the base. There is no braid, this is a budget cable. – for $1.59 long for 2A,
For a current limit of 3A, the voltage drop is no more than 0.2V, which is also an acceptable result.
Scan the code, we get a link to confirm that this is the original Baseus, and not a fake Chinese .
View from Type-c side Fast charging naturally works (9V / 1.5A). There is an embossed inscription Baseus Support for 2.4A is also declared. 3A for meter cables.
It came without a track, with the Baseus information insert Appearance – a simple cable, the sheath is not plastic, rubber, does not slip. So you can take it.
Here’s what was on the site:
I check specifically with a power bank, since it does not overestimate the voltage, and you can honestly check whether this cable will work complete with a power bank. < /p>
At a current of 3A, the loss was 0.184V (calculated resistance value 0.061 ohm).
Characteristics of the Baseus 3A cable
The length is even more than 50 cm, just the length of the connectors. An even better option is Baseus braided cables. The cable is really compact, I usually stuff these with gadgets with me. It is convenient to take on trips, wear it all the time, put it in an organizer or bags with gadgets. I took it for certain purposes – to carry with me with a power bank (a short one is more convenient, and there are less losses), to charge the power bank itself (less loss – faster charging of a large capacity), and for a soldering iron (very critical to power).
Calculate the cable loss
In principle, this is a very good result. This is a simple cable for charging devices. branded. Given that this is a really good cable, more of these are needed. Health tests. The phone determines and requests how much it needs. The old Orico on 3A and 5A proved to be not very resistant to wear, I’ll check Baseus now
In appearance, there is nothing more to say, it is made according to standards, nothing dangles, it enters the Type-C and USB socket without play, like all other standard cables. For typical values ​​​​when charging a smartphone (up to 1.5A), the voltage drop is minimal, when charging a tablet or power bank, the loss will be about 0.1V, given that most charges overestimate the voltage to 5.1V. 5.2V, this is also not a problem. Branded packaging, with a zip-package, sealed.
At a current of 2A, the loss was 0.111V (calculated resistance value 0.056 ohms).